Ram Jack Distribution, LLC
Why Ram Jack?
Case Studies
Liberty Bowl Score Board

Case Studies

Situation: FedEx CEO Fred Smith donated 2.5 million dollars to the University of Memphis to cover the cost of a new high-definition video board in the Liberty Bowl Memorial Stadium's south end zone. The new 100-by-50 ft. board will be the fifth-biggest in the country(1). Due to the new (sail) height, engineers on the project called for [4] four drilled shafts to 40 ft. filled with concrete to support steel I-beam columns. After the outer two piles were installed they realized that during the due diligence phase of the project, the engineers missed a field of utilities; gas, water and electricity directly beneath and smack dab in the way of the remaining two pile locations. Additionally space constraints demanded they look elsewhere for a solution.

Solution: Move the remaining two piles to a location between the structure and Stadium using helicals.

Conclusion: Patton Taylor Ent. (GC) called Michael Seebeck in to access the situation and design an alternate solution that would allow the project to continue on schedule and budget. With support from Darin Willis and Ram Jack Distribution, two [2] foundation support pads were designed to support a 200 kip vertical load (tension and compression). The 200k VL will be transferred from an existing steel scoreboard column support by a W 12 x 65 wide flange beam that will extend outward at a downward diagonal direction and be braced back into the existing steel scoreboard column support. The foundation support pads will consist of concrete caps that will be securely anchored to the ground with [7] seven 2 7/8 inch diameter Ram Jack helical piers. Loads will be transferred from the concrete caps to the helical piers by Ram Jack new construction brackets. The new concrete caps have a minimum thickness of 3 ft. 6 inches and will be reinforced with two mats of steel consisting of fourteen #6 rebar extending in both directions. These rebar mats will be located at the top and the bottom of the new concrete caps. The caps were designed by Joseph John Chappo (TN registration).

Helical piers were designed by Ram Jack engineers utilizing information from boring logs supplied by Geotechnical engineers. Ram Jacks’ Computer Aided pile design software recommend a double helical 8 – 10 configuration which also meets ICC-ES ESR 1854.

Seven helical piers were installed at each foundation support pad using a 7k torque motor fluid power provided by a yanmar backhoe. New construction brackets were attached to the helical piers by 7/8” diameter grade 8 bolts. These over-sized bolts were required due to tension requirements.

Download the full case study in PDF format

Project Type: Commercial
Year: 2013
Product Scope: New Construction
Product: Helical
Design Capacity: 26 to 50 kips
Pile Diameter: 2 7/8"

Ram Jack can help restore the value of your largest investment.