Our team provides sump pumps installations to ensure your basement stays dry year round.
SUMP PRO
System Specifications
System Model Sumpro® Model 100
Includes:
- 15 amp inverter with status lights
- Dual battery box with fuse bar
- Input Voltage 120 VAC/24VDC (2 batteries, sold separately), 60 Hz, 12 amp
- Output Voltage 120 VAC, 12 amps Pump Type
- Any 115 volt pump up to 12 amps (not included)
THE STORM PRO BA50 SERIES MAIN PUMP
- Discharge: 2″ N.P.T.
- Liquid Temperature: 104°F
- Motor Housing: Stainless Steel (304)
- Pump Strainer: Stainless Steel (304)
- Impeller: Non-Clogging Vortex, Cast Iron
- Shaft: Stainless Steel (410)
- O-Rings: Buna-N
- Hardware: Stainless Steel
- Seal: Dual Mechanical, Type 21, Oil Lubricated
- Material:
- Rotating Faces: Silicon Carbide
- Stationary Faces: Silicon Carbide
- Upper Bearing: Single Row, Ball, Oil Lubricated
- Lower Bearing: Single Row, Ball, Oil Lubricated
- Motor: Single Phase, Permanent Split Capacitor
- (PSC) Includes Thermal Overload Protection,
- Class B Insulation
AC/DC BATTERY BACK-UP SYSTEM
35ACI+
Systems Specifications
- ⅓ HP pump with PSC, energy efficient motor: 4.5 amps Up to 68 GPM
- Fully automatic, converts 12 volt DC to 120 volt AC when utility power is lost
- Runs ⅓ HP pump on AC or DC power
- Inverter has digital display, tells status of system at all times
- Requires one 12 volt deep cycle AGM battery (battery NOT included)
- Non-corrosive battery enclosure
- Includes piggyback Ion+® digital level control/alarm sensor with no moving parts
- Built-in alarm and monitoring system with Power, System and High Water LEDs and audible alarm
- Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
AC/DC BATTERY BACK-UP SYSTEM 55ACI+
Systems Specifications
- ½ HP pump with PSC, energy efficient motor: 5.8 amps Up to 78 GPM
- Fully automatic, converts 24 volt DC to 120 volt AC when utility power is lost
- Runs ½ HP pump on AC or DC power
- Inverter has digital display, tells status of system at all times
- Requires two 12 volt deep cycle AGM batteries (batteries are NOT included)
- Non-corrosive battery enclosure
- Includes piggyback Ion+ ® digital level control/alarm sensor with no moving parts
- Built-in alarm and monitoring system with Power, System and High Water LEDs and audible alarm
- Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
COMBINATION MAIN PUMP 35ACI DELUXE
System Specifications
- Fully automatic, converts 24 volt DC to 120 volt AC when power is off
- Runs pump on AC or DC power
- Inverter has digital display, tells status of system at all times
- Requires two 12 volt deep cycle AGM batteries (batteries are NOT included)
- Non-corrosive battery enclosure
- Ion Genesis ® controller alternates each pump and alarms
- Ion Genesis ® includes piggyback Ion ® digital level control sensors with no moving parts
- First of its kind solid-state sensing technology with no moving parts
- Multipoint sealing mechanism that supersedes single surface seals
- Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
AC/DC BATTERY BACK-UP SYSTEMS 55ACI DELUXE
Sump Pump System Specifications
- Fully automatic, converts 24 volt DC to 120 volt AC when power is off
- Runs pump on AC or DC power
- Inverter has digital display, tells status of system at all times
- Requires two 12 volt deep cycle AGM batteries (batteries are NOT included)
- Non-corrosive battery enclosure
- Ion Genesis ® controller alternates each pump and alarms
- Ion Genesis ® includes piggyback Ion ® digital level control sensors with no moving parts
- First of its kind solid-state sensing technology with no moving parts
- Multipoint sealing mechanism that supersedes single surface seals
- Rated at 2 million cycles, it will last 4 times longer than a standard pump switch
ION SWITCH TECHNOLOGY
- First of a kind solid-state sensing technology with no moving parts.
- Multipoint sealing mechanism that supersedes single surface seals.
- Inverter rated for use with most battery back-up systems.
- Space age design with no contact points.
- Rated for both effluent and sewerage pumps.
- For use with all 120 vac pumps up to 15 amps.
- Auto power reset NO TOUCH design.
- No maintenance or cleaning required.
- Factory calibrated.
Our Resin sump basins and 2-part sealed lids that bolt down to help keep debris from entering your sump basin but make access to the sump basin a breeze. Are both structural foam filled for the added peace of mind. In fact our sump pump lids can hold over 500 lbs.
SAFEGUARD SUPREME SUMP AND BACK-UP SYSTEMS COME WITH OUR DELUXE 3 YEAR WARRANTY!
- Moving and non-moving parts.
- Switches (ION digital control sensors).
- Batteries.
- Check valves.
- Controllers
- Charging units.
- Labor.
- No trip fees.
Related reading:
Still not sure if you should install a sump pump?
Contact Safeguard Waterproofing - Ram Jack Illinois for sump pump installations in Chicago!
