Protect Your Basement with Waterproofing Services Chicago, IL Homeowners Trust
After years of living in Chicago’s wet climate, it’s probably not surprising when you notice dark, damp spots on your wall or additional cracks near your foundation.
When you smell a musty odor in the basement, it’s a sign that you need to call Safeguard Waterproofing for a free inspection. We perform our basement waterproofing service for Chicago and Arlington Heights area homes just like yours, and we often see damages you won’t.
Here’s how to know if your basement is a good candidate for waterproofing:
- Your basement floods frequently (if not every spring).
- You start to see cracks in your wall or on your home’s exterior.
- Your basement windows and doors won’t open/close properly.
- You see moldy areas or smell musty smells when you go to the basement.
- Your carpet feels damp underfoot most of the time.
- Some electrical outlets or fixtures don’t work properly.
Even if you’ve been lucky to avoid water damage thus far, you may know someone in your area who hasn’t been as lucky. It’s time to know for sure by calling Safeguard Waterproofing.
Choose the Service that Protects You Best
If you’re tired of worrying about your basement, foundation, or crawlspace, you don’t need to do so any longer. Here’s what you can expect from our waterproofing services:
- Comprehensive waterproofing (protects you from future damages)
- Drain tile installation that prevents seepage (interior and/or exterior)
- Sump pump installation and battery backup systems (will keep you dry)
- Yard drainage (prevents damage from soggy ground)
- Foundation repairs (keeps water from seeping inside)
With careful basement waterproofing services, your Chicago, IL area home stays dry and protected when storms rage and floods come. Don’t wait. Get a free inspection today for better peace of mind tomorrow.
Water Trek Aqua Route
The Water Trek Aqua Route Waterproofing system is simply the most effective system on the market – bar none!
Top 5 Reasons to Use Water Trek Aqua Route:
- Less expensive than typical waterproofing systems
- Less invasive than typical waterproofing systems
- Clog resistant sits on top of the footing not down in the mud
- A unique patented system that can be custom tailored to each home
- Carries a lifetime transferable warranty
Interior Drain Tile
Our crews arrive in company trucks, and in uniforms.
A trench is dug and a rigid 4″ PVC Pipe is installed with a filter sock when required by code.
The perimeter of the basement floor is opened up and removed.
The trench is filled with washed stone and the drainage fabric is installed.
Inspection ports are installed to allow for access to the system.
The floor is closed using concrete mix.
A crock, main pump, battery backup system, and high water alarm are installed.
The crock is sealed and the pumps are connected.
Top 5 Reasons to Purchase a Safeguard Interior Drain Tile System:
- Full lifetime transferable warranties
- A permanent solution to your water problems
- Installed by our own fully trained crew members
- Each system is customized to your home
- Join a growing list of over 70,000 satisfied customers who have chosen to use our 31 year old family owned business
Safeguard waterproofing is here yesterday, today & tomorrow for your peace of mind!
Exterior Drain Tile
When performing an exterior drain tile system any obstacles in the way need to be removed. Some examples are central ac units, decks, and any landscaping in the area around your foundation.
Safeguard will then dig down to the footing of the building exposing the foundation wall. Spoils will be placed on a protective material to help protect the surrounding area.
Once the walls are exposed they are professionally cleaned. Safeguard then applies HLM 5000, a modified urethane sealant, to the wall followed by Mirafi self-sealing membrane. Then Mari Drain backer board is placed over the membrane.
Once the wall is completely sealed we install a 4″ rigid PVC drainage pipe with a filter sock. This is surrounded by washed stone and then covered with a landscaping fabric. In the photos above a window well drain is installed.
The window well is reinstalled, removed earth is backfilled to grade and left mounded to allow for future settlement. All debris is removed from the job site and the project is complete, with a full warranty against seepage.
All Sump Pumps Can Fail
Storms, power outages, and unforeseen mechanical failure can all cause sump pump failure.
Don’t think you need a backup system?
We recommend all Safeguard Waterproofing customers plan for the unforeseen.
- Battery powered sump pump for power outages
- Backup pump to your primary sump pump
- Automatic start-up
- Indicating lights on charger
- Built in alarm system
- 12 volt pump
- 10 amp battery charger
- Float switch
|CAPACITY RATINGS||VERTICAL PUMPING DISTANCE|
|5 Feet||10 Feet|
|Gallons Per Hour||3,700||3,000|
|Battery Life (105 Amp Hour Battery)||9||10|
|Total Gallons Pumped||33,300||27,000|
Performance data based on two 120 Amo hour U.L. Recognized Lead Acid Type batteries used in conjunction with pumps of the published horsepower ratings. All equipment in optimum condition. Endurance may vary depending on the products used.
Interior Crack Repairs
There are several ways to try and fix a foundation crack from the inside, but not all interior crack repairs are the same!
Let us explain:
- Surface patching almost never works due to continued wall movement the patch opens backup.
- Bleeder tubes simply drain the water to under the floor which is not a good idea because water is erosive and this will probably cause larger problems in the future.
- When a contract states resin injection, make sure you ask which resin because other contractors use the least expensive alternative.
- Urethane is a form of resin that swells to fill voids, but despite the fact that it is water resistant, it does not bond the wall back together, and it is much less expensive for the contractor to use.
- Epoxy is another form of resin but is much stronger than urethane and helps bond the broken wall to give a permanent quality repair.
Demand epoxy injections for a permanent repair! At Safeguard Waterproofing we almost always use straight epoxy.
The crack is professionally cleaned.
Surface ports are installed and rapid set material is applied over repair area.
Epoxy is injected throughout crack.
Finished repair lifetime warranty!
Exterior Crack Repairs
Not all exterior crack repairs are the same! There are a few different ways to fix a crack from the outside.
At Safeguard Waterproofing we only fix them one way: the right way, the permanent way!
Step 1: Post hole digging is simply not a great idea. There is no way of knowing that you have sealed the entire crack.
Step 2: The old magic wand—trying to shoot a slurry into the ground—is simply hocus-pocus!
Step 3: Tar and a plastic sheet. Do you really want a plastic sheet used to keep water out of your basement?
Step 4: Dig down to the footing and apply the 4-step process is a sure-fire way of doing a permanent repair.
Inspect and locate the crack.
Dig down to footing and expose the crack.
Clean the crack and apply shrink mortar.
Apply HLM 5000 modified urethane sealant and Mirafi membrane
Apply Mari-Drain backer board
Back fill the hole with a bentonite concentrate and leave the earth mounded for future natural settlement.
Clean shield wall liner:
This is a triple ply, extrusion coated, virgin polyethylene membrane. The Clean Shield is 16 mil thick with fiber reinforcement, designed to yield the highest strength-to-weight ratio of any product of its kind. It will help reduce/prevent the transmission of moisture and moisture vapors through your basement walls while providing a semi-finished look.
Finish white waterproofing wall panels:
Cut finishing costs and waterproof at the same time! The panels attach directly to your foundation walls, providing a clean fresh look to your basement while helping to control moisture and moisture vapors through your basement walls.
Thermo insulating blanket:
This state of the art insulation/waterproofing blanket has a built in radiant barrier and is certified by ENERGY STAR to achieve up to R 16.8. This helps reduce energy costs and control moisture and moisture vapors through your basement walls, getting them ready for finishing.
Over the Top
Over the Top occurs when the top of your foundation is buried below grade. Some examples would be when landscaping is too high, and when concrete sidewalks are poured up to the building, leaving no space between the two.
Above you will notice landscaping, earth, and a sidewalk all built up over the top of the foundation. All prime examples of eventual consequences of water leaking into your basement.
Safeguard will water test your property to verify the below grade spill over, as you can see from the photos above. (Water stains running down the wall).
Safeguard can remove any concrete or landscaping and will dig a trench to expose the area of your foundation that is buried below grade level. We then seal the wall with HLM 5000 modified urethane sealant and Mirafi peel and stick membrane. We install our drainage piping and fabric.
Safeguard then backfills the trench with washed stone, and re-cements where needed. Then we install a discharge line to move the water to the specified location.
Safeguard hooks up the discharge line per city or village codes. Then we remove all debris from the area. Safeguard solves your over the top-below grade water problem.
Exterior Wall Membrane
The job site is prepared for the Dig to repair and seal the wall.
The wall is professionally cleaned and any flaws are addressed.
HLM 5000 Modified Urethane sealant is applied to the wall.
Mirafi self-sealing membrane is then attached to the wall.
Mari-Drain backer board is then installed over the membrane.
The job site is then backfilled to grade and all debris is taken away.
Flood check hoses:
Traditional washing machine hoses may seem strong, but hot water can cause the rubber to become brittle and fail. Flood Check hoses start out with the same rubber tubing, but they add two braided rayon reinforcement, a .012″-gauge rubber jacket and a .063″-gauge rubber cover. And since most floods start at the coupling, Flood Check hoses are machined from non-corroding solid brass.
Hot water tanks can “let go” every 5-10 years. When this happens, the water damage can be devastating. The entire basement gets flooded ruining all your contents. Tank Pro is a patented water tank protector. Designed to contain the water and drain it into your sub system. Hot water tanks, water purifiers, washing machines, etc. can all be protected. Protect your basement from unexpected hot water tank breaks.
Pipe column wraps:
Pipe column wraps is a patented product designed to cover any hard pole type object for safety or cosmetic purposes, perfect for any basement finishing project.
This material is factory molded and layered with an impregnated nylon barrier which gives it its strength, capable of withstanding up to 300 lbs. of pressure per layer.
The Hot Floor is specially insulated padded barrier installed on top of your concrete basement floor and under the plywood and carpet. It’s unique because it actually gives you the warmth and comfortable feeling of a hot floor similar to the top floor of your home. Headroom Height and loss is kept to ¾ to 1″ as opposed to the more costly alternatives that cause as much as 4 ½ to 5″ of headroom.
Complete with grate
Complete with grate
Want to make usable living space in your lower level? Need an alternative escape route? Well, most cities and villages require it!
Safeguard will check the building codes in your area, and we will measure your home’s foundation and determine the proper size vinyl thermo pane escape window and escape well. We will remove the old window, dig down, and remove the earth. Cut the foundation wall when needed, install the new window well, and then cover, leaving you with an alternative escape route.